{ "cells": [ { "cell_type": "markdown", "metadata": { "toc-hr-collapsed": false }, "source": [ "
\n", " To begin: Click anywhere in this cell and press Run on the menu bar. This executes the current cell and then highlights the next cell. There are two types of cells. A text cell and a code cell. When you Run a text cell (we are in a text cell now), you advance to the next cell without executing any code. When you Run a code cell (identified by In[ ]: to the left of the cell) you advance to the next cell after executing all the Python code within that cell. Any visual results produced by the code (text/figures) are reported directly below that cell. Press Run again. Repeat this process until the end of the notebook. NOTE: All the cells in this notebook can be automatically executed sequentially by clicking Kernel→Restart and Run All. Should anything crash then restart the Jupyter Kernal by clicking Kernel→Restart, and start again from the top.\n", " \n", "
" ] }, { "cell_type": "markdown", "metadata": {}, "source": [ "
\n", "\n", "\n", "\n", "

ANNSigSig_MTBLS547

\n", "\n", "
\n", "
\n", "
\n", "

The study used in this tutorial has been previously published by Zheng et al. (2017), and the deconvolved and annotated data file deposited at the Metabolights data repository. The data can be accessed directly via its study ID: MTBLS547. This workflow requires data to be formatted as a Microsoft Excel file, using the Tidy Data framework (i.e. each column is a variable, and row is an observation). As such, the Excel file contains a Data Sheet and Peak Sheet. The Data Sheet contains all the metabolite concentrations and metadata associated with each observation (requiring the inclusion of the columns: Idx, SampleID, and Class). The Peak Sheet contains all the metadata pertaining to each measured metabolite (requiring the inclusion of the columns: Idx, Name, and Label). Please inspect the Excel file MTBLS547.xlsx used in this workflow before proceeding.

\n", "\n", "

This is a caecal content (of mice) LC-MS dataset consisting of 42 named metabolites. The primary outcome for this paper was high fat diet (HFD; n=46) vs. healthy control (HC; n=51). For the purpose of this study, we compare HFD (Class=1) vs. HC (Class=0) in a binary discriminant analysis.

\n", " \n", "
\n", "\n", "\n", " \n", "
" ] }, { "cell_type": "markdown", "metadata": {}, "source": [ "
\n", " \n", "

ANN-SS Workflow

\n", "
\n", "

This Jupyter Notebook implements the complete workflow for creating, optimising, and evaluating a 2 layer artificial neural network with Layer 1 consisting of multiple neurons (n = 2 to 6) with a sigmoidal activation, and Layer 2 (output layer) consisting of a single neuron with a sigmoidal activation function (ANN-SS). ANN was implemented using Keras with a Theano backend.

\n", " \n", " Please refer to the 'cimcb' package documentation for further details regarding this specific implementation: https://cimcb.github.io/cimcb
\n", " \n", "
\n", "\n", " ANN uses the following Hyperparameter(s):\n", "\n", "The purpose of each hyperparameter is explained here: Nielsen (2015)\n", " \n", "
\n", "
\n", "\n", "

Preliminary analysis indicated, for the metabolomics data sets used in this study, that varying hyperparameters momentum and decay had little impact on performance, thus they were kept constant at their default values. Additionally, it was observed that fixing the number of epochs to 400 proved effective across most of the data sets. Thus hyperparameter optimisation was reduced to a grid search across n_neurons = [2,3,4,5,6] and learning_rate = [0.0001,0.001,0.01,0.1,1] . After the number of neurons is chosen, the learning rate was fine-tuned as appropriate using a linear search.

\n", "\n", "
\n", "\n", " The notebook workflow is broken into the following steps:\n", "\n", "
    \n", "
  1. Import Packages: First, the Python packages required for this workflow need to be imported (numpy, pandas, and cimcb).\n", "
    2. \n", "
  2. Load Data & Peak Sheet: From the Excel spreadsheet, import the Data and Peak spreadsheets and create two respective Pandas tables: DataTable and PeakTable.
    3. \n", "
  3. Extract X & Y: Next, we reduce the data in DataTable to include only those observations needed for the binary comparison and create a new table: DataTable2. We define one column of the data table to be the \"outcome\" variable Outcomes, and convert the class labels in this column to a binary outcome vector Y, where 1 is the positive outcome, and 0 the negative outcome (eg. case=1 & control=0). A new variable peaklist is created to hold the names (M1...Mn) of the metabolites to be used in the discriminant analysis. To create an independent dataset to evaluate, scikit-learn module's train_test_split() function is used. The data is split into 2/3rd training (DataTrain and YTrain), and 1/3rd test (DataTest and YTest). The metabolite data corresponding to peaklist is extracted from DataTrain and placed in a matrix XTrain. The XTrain matrix is log-transformed and auto-scaled, with missing values imputed using k-nearest neighbours (k=3). Then the metabolite data corresponding to peaklist is extracted from DataTest and placed in a matrix XTest. The XTest matrix is log-transformed and auto-scaled (using mu and sigma from XTrain), with missing values imputed using k-nearest neighbours (k=3).\n", "
  4. Hyperparameter Optimisation: Here, we use the helper function cb.cross_val.KFold() to carry out 5-fold cross-validation of a set of ANN models (ANN-LS) configured with different values for learning rate (0.001 to 1) and number of neurons (2 to 6). This helper function is generally applicable, and the values being passed to it are: \n", "
      \n", "
    • The class of model to be created by the function, cb.model.NN_SigmoidSigmoid.
      • \n", "
    • The metabolite matrix, XTknn, and binary outcome vector, Y.
      • \n", "
    • A dictionary, param_dict, describing key:value pairs where the key is a parameter that is passed to the model, and the value is a list of values to be passed to that parameter.
      • \n", "
    • The number of folds in the cross-validation, folds, and the number of monte carlo repetitions of the k-fold CV, n_mc.
    \n", "When cv.run() followed by cv.plot(metric='r2q2') are run the predictive ability of the multiple models across the hyperparameter grid search (n_neurons vs. learning_rate) are displayed in the form of heatmaps representing the parametric performance values $R^2$, $Q^2$ and $|R^2 - Q^2|$. These heatmaps are interactively linked to a scatter plot of $|R^2 - Q^2|$ vs. $Q^2$ and line plots of $R^2$ & $Q^2$ vs n_neurons and learning_rate. If the function cv.plot(metric='auc') is run the predictive ability of the models is presented as measures of the area under the ROC curve, $AUC(full)$ & $AUC(cv)$, as a nonparametric alternative to $R^2$ & $Q^2$. These multiple plots are used to aid in selecting the optimal hyperparameter values.
    5. \n", "
  5. Build Model & Evaluate: Here, we use the class cb.model.NN_SigmoidSigmoid() to building a ANN-SS model using the optimal hyperparameter values determined in step 4. The model is trained on the training dataset, XTrainKnn, and tested on the independent test dataset, XTestKnn. Next, the trained model's .evaluate() method is used to visualise model performance for both the training and independent test dataset using: a violin plot showing the distributions of negative and positive responses as violin and box-whisker plots; a probability density function plot for each response type, and a ROC curve that displays the curve for the training dataset (green) and test dataset (yellow).\n", "
  6. Bootstrap Evaluation: Finally, to create an estimate of the robustness and a measure of generalised predictive ability of this model we perform bootstrap aggregation (Bagging) using the helper function cb.bootstrap.Per() with 100 boostrapped models. This generates a population of 100 model predictions for both the training set (in-bag prediction - IB) and the holdout test set (out-of-bag - OOB) from the full dataset, with the metabolite matrix, XBootKnn, and binary outcome vector, Y. These predictions are visualised with a box-violin and probability density function plot for the aggregate model. The ROC curve displays the curve for the training dataset (green) and test dataset (yellow) from section 5 with 95% confidence intervals (light green band = IB & light yellow band = OOB).\n", "
  7. Export Results: Exporting the model evaluation results as an Excel spreadsheet.
    8. \n", "
\n", "\n", "
" ] }, { "cell_type": "markdown", "metadata": { "toc-hr-collapsed": true }, "source": [ "### 1. Import Packages" ] }, { "cell_type": "code", "execution_count": null, "metadata": {}, "outputs": [], "source": [ "import numpy as np\n", "import pandas as pd\n", "import cimcb as cb\n", "from sklearn.model_selection import train_test_split\n", "\n", "print('All packages successfully loaded')" ] }, { "cell_type": "markdown", "metadata": {}, "source": [ "### 2. Load Data & Peak Sheet" ] }, { "cell_type": "code", "execution_count": null, "metadata": {}, "outputs": [], "source": [ "home = 'data/' \n", "file = 'MTBLS547.xlsx' \n", "\n", "DataTable,PeakTable = cb.utils.load_dataXL(home + file, DataSheet='Data', PeakSheet='Peak') " ] }, { "cell_type": "markdown", "metadata": {}, "source": [ "### 3. Extract X & Y" ] }, { "cell_type": "code", "execution_count": null, "metadata": {}, "outputs": [], "source": [ "# Extract PeakList\n", "PeakList = PeakTable['Name'] \n", "\n", "# Select Subset of Data\n", "DataTable2 = DataTable[(DataTable.Class == 1) | (DataTable.Class == 0)]\n", "\n", "# Create a Binary Y Vector \n", "Outcomes = DataTable2['Class']\n", "Y = Outcomes.values \n", "\n", "# Split Data into Train (2/3) and Test (1/3)\n", "DataTrain, DataTest, YTrain, YTest = train_test_split(DataTable2, Y, test_size=1/3, stratify=Y, random_state=58)\n", "\n", "# Extract Train Data \n", "XTrain = DataTrain[PeakList] \n", "XTrainLog = np.log(XTrain) \n", "XTrainScale, mu, sigma = cb.utils.scale(XTrainLog, method='auto', return_mu_sigma=True) \n", "XTrainKnn = cb.utils.knnimpute(XTrainScale, k=3) \n", "\n", "# Extract Test Data\n", "XTest = DataTest[PeakList] \n", "XTestLog = np.log(XTest) \n", "XTestScale = cb.utils.scale(XTestLog, method='auto', mu=mu, sigma=sigma) \n", "XTestKnn = cb.utils.knnimpute(XTestScale, k=3) " ] }, { "cell_type": "markdown", "metadata": {}, "source": [ "### 4. Hyperparameter Optimisation" ] }, { "cell_type": "code", "execution_count": null, "metadata": { "scrolled": false }, "outputs": [], "source": [ "# Parameter Dictionary\n", "lr = [0.001,0.005,0.01,0.05,0.1,1]\n", "neurons = [2, 3, 4, 5, 6]\n", "\n", "param_dict = dict(learning_rate=lr,\n", " n_neurons=neurons,\n", " epochs=400,\n", " momentum=0.5,\n", " decay=0,\n", " loss='binary_crossentropy')\n", "\n", "\n", "# Initialise\n", "cv = cb.cross_val.KFold(model=cb.model.NN_SigmoidSigmoid, \n", " X=XTrainKnn, \n", " Y=YTrain, \n", " param_dict=param_dict, \n", " folds=5,\n", " n_mc=10) \n", "\n", "# Run and Plot\n", "cv.run() \n", "cv.plot(metric='auc', color_beta=[5,5,5])\n", "cv.plot(metric='r2q2', color_beta=[5,5,5])" ] }, { "cell_type": "code", "execution_count": null, "metadata": {}, "outputs": [], "source": [ "# Parameter Dictionary\n", "lr = [0.001,0.02,0.04,0.06,0.08,0.1,0.12,0.14,0.16,0.5,1]\n", "\n", "param_dict = dict(learning_rate=lr,\n", " n_neurons=4,\n", " epochs=400,\n", " momentum=0.5,\n", " decay=0,\n", " loss='binary_crossentropy')\n", "\n", "# Initialise\n", "cv = cb.cross_val.KFold(model=cb.model.NN_SigmoidSigmoid, \n", " X=XTrainKnn, \n", " Y=YTrain, \n", " param_dict=param_dict, \n", " folds=5,\n", " n_mc=10) \n", "\n", "# Run and Plot\n", "cv.run() \n", "cv.plot(metric='auc')\n", "cv.plot(metric='r2q2')" ] }, { "cell_type": "markdown", "metadata": {}, "source": [ "### 5. Build Model & Evaluate" ] }, { "cell_type": "code", "execution_count": null, "metadata": { "scrolled": false }, "outputs": [], "source": [ "# Build Model\n", "model = cb.model.NN_SigmoidSigmoid(learning_rate=0.06, \n", " n_neurons=4,\n", " epochs=400,\n", " momentum=0.5, \n", " decay=0, \n", " loss='binary_crossentropy')\n", "YPredTrain = model.train(XTrainKnn, YTrain)\n", "YPredTest = model.test(XTestKnn)\n", "\n", "# Put YTrain and YPredTrain in a List\n", "EvalTrain = [YTrain, YPredTrain]\n", "\n", "# Put YTest and YPrestTest in a List\n", "EvalTest = [YTest, YPredTest]\n", "\n", "# Evaluate Model (include Test Dataset)\n", "model.evaluate(testset=EvalTest) " ] }, { "cell_type": "markdown", "metadata": {}, "source": [ "### 6. Bootstrap Evaluation" ] }, { "cell_type": "code", "execution_count": null, "metadata": {}, "outputs": [], "source": [ "# Extract X Data\n", "XBoot = DataTable2[PeakList]\n", "XBootLog = np.log(XBoot)\n", "XBootScale = cb.utils.scale(XBootLog, method='auto')\n", "XBootKnn = cb.utils.knnimpute(XBootScale, k=3)\n", "YPredBoot = model.train(XBootKnn, Y)\n", "\n", "# Build Boostrap Models\n", "bootmodel = cb.bootstrap.Per(model, bootnum=100) \n", "bootmodel.run()\n", "\n", "# Boostrap Evaluate Model (include Test Dataset)\n", "bootmodel.evaluate(trainset=EvalTrain, testset=EvalTest) " ] }, { "cell_type": "markdown", "metadata": {}, "source": [ "### 7. Export Results" ] }, { "cell_type": "code", "execution_count": null, "metadata": {}, "outputs": [], "source": [ "home = 'results/'\n", "file = 'ANNSigSig_MTBLS547.xlsx'\n", "\n", "bootmodel.save_results(home + file)" ] }, { "cell_type": "code", "execution_count": null, "metadata": {}, "outputs": [], "source": [] } ], "metadata": { "kernelspec": { "display_name": "Python 3", "language": "python", "name": "python3" }, "language_info": { "codemirror_mode": { "name": "ipython", "version": 3 }, "file_extension": ".py", "mimetype": "text/x-python", "name": "python", "nbconvert_exporter": "python", "pygments_lexer": "ipython3", "version": "3.7.3" }, "toc": { "base_numbering": 1, "nav_menu": {}, "number_sections": false, "sideBar": false, "skip_h1_title": false, "title_cell": "Table of Contents", "title_sidebar": "Contents", "toc_cell": false, "toc_position": {}, "toc_section_display": false, "toc_window_display": false }, "toc-autonumbering": false, "toc-showmarkdowntxt": false }, "nbformat": 4, "nbformat_minor": 2 }